1 Quoting on a airplane hanger that needs a 40 ft Schweiss aviation door to replace our lousy sliding doors.
2 I am building a 75x155 hangar with 22 eave. Would like to know approximate hydraulic door cost and installation cost for a 75 foot wide by 20 foot high straight hydraulic door. Thanks.
3 Wanting information and price on a 14 ft high by 40 ft wide bifold and or hydraulic aircraft hangar door for a metal hangar. Door needs to be insulated. For bifold door include price with addition of liftstraps and autolatch door closer.
4 I am building a 40' deep x 48' wide x 12' high hangar. Need one large hydraulic aircraft hangar door. Door to include walk door and automatic door opener.
5 Have need for 70' wide x 18' hydraulic corporate aircraft hangar door, 18' min. clear height in a steel building. I need to know what the rough opening door height should be. In trying to set an eave height, I need to know how much vertical door height is taken up by the hydraulic door and its supports when door is in open position.
6 Putting some pricing together for a client that is looking to buy some Schweiss hyd. transport aircraft hangar doors. I don't know what the framed opening size needs to be in order to get the desired clearances but what I need is the following: (8 EA) 50' wide by 12' clear doors (in sidewall) (2 EA) 100' wide by 16' clear doors (in endwall) Framed opening height is adjustable to fit whatever is needed for these Scheiss heavy duty hangar doors to get the clear heights.
7 This large hangar door is for a Municipal Airport in AR. I can forward you the specs if you need them. Hydraulic aviation use door will be 80 wide X 25 clr. Will need the design info ASAP to design our metal building hydraulic door.
8 I am building a 60 x 60 aircraft hanger and need industrial strength hangar doors. I currently fly a Cirrus, with a 38' wing span. I am proposing this 60 x 60 building, so that it can have re-sale potential to an owner with a larger airplane. For a majority of planes, a 50' x 16' opening size for a hydraulic opening and remote opening aeronautical door should suffice.
9 We installed a strap type bifold hangar door last year and found that it lives up to everything Schweiss Doors says it is. They are faster, smoother and safer doors. We now require a larger hydraulic lifting door for our aircraft maintenance building - 52'x20'
10 I bought a used airline hangar and need a new hangar door on it. Hangar was modified 30 years ago to accommodate an Aerostar. A sliding door needs to be removed and a Schweiss hydraulic door installed. I can send photos. They cut the door header to allow the aircraft tail to pass through. The header is exactly 10 ft. above the concrete floor. The opening from side to side is 48 ft. with some concrete door supports on the inside corners. We would like to keep all of the 10 ft. hangar door clearing. A local contractor can modify the front of hangar and install the new Schweiss hangar door. We intend to insulate the hangar door, and install heat. So, we need a Schweiss insulated hydraulic one piece door.
11 Need cost for 5 large corporate jet hangar building doors. Large steel frame Schweiss aviation hydraulic door with automatic remote closing device, wide enough and tall enough for a Airplane 737 in Puerto Rico. Hangar door is on cement block construction.
12 I want to replace cables with a hydraulic door on our company corporate hangar. Door is 62 ft. x 32 ft. Also price windows and walkdoors. We want this to be a faster opening hangar door.
13 I would like pricing on a hydraulic door for an aircraft hanger in Canada. The hangar door dimensions need to be 60' wide with an opening height of 20'. Include remote hangar door opener. We will provide thermal door insulation.
14 I fly for the Royal Canadian Airforce and plan to build my own hangar. A friend recommended Schweiss Doors. I'm planning a 60x60x18. I think a 50' hangar door will fit well but you guys are the professional door dealers and I will take your recommend. The building height may change to a lower one 14' as we may not need the 18' foot hangar door anymore. We had originally planned for a upper floor door on the back part. Can you please let me know cost for what I need and what hangar door would better suit us, straps, cable or hydraulic, bi-fold or one piece aviation door.
15 Re: Orlando Airpark hangar doors. Need quote on two more (2) 60 ft x 18 ft hydraulic executive hangar doors with straps and auto side locks.
16 Project is a 80X100 corporate jet aircraft hangar. Engineer has requested a large Schweiss hydraulic hangar door 24' X 85'. Include all options and standard door equipment available to include remote opener, windows, walk doors, backup and safety systems, etc.
17 Looking for price on an 80' wide x 18' tall hydraulic airline hangar door. Corporate is interested in seeing the price difference if they decrease the opening size to 70' wide x 17' tall (These new high horsepower hydraulic door dimensions are clear dimensions). Absolute minimum clear door dimensions are 70' wide x 17' tall. I will also need some hangar door loading information so that we may accurately quote the steel structure.
18 Corporate hangar door windows should be delivered to County Airport C-4, at the same address you delivered the hydraulic hanger door to. Thank you for your reliable door service. Schweiss Doors always delivers!
19 I'd like Schweiss Doors to bid a Corporate Airport hydraulic hangar door in FL. Steel door, with 5 windows, one walkdoor. Opening size of 60' x 28'. Remote opening with backup systems.. Windrated door to Florida specs.
20 We are currently gathering estimates for the construction of a 60 x 100 foot hangar. Please include costs for an insulated Schweiss hydraulic door with remote control and two handhelds. Include prep for a steel interiodr liner. thanks
21 My company is putting together a bid for a County Municipal Airport. Your company was listed in the blueprints as an acceptable company for the hangar door. Per the blueprint: "Steel hydraulic Hangar Door by Schweiss Doors Inc or equal. Provide with sensing edge, remote control, door base safety edge, 3 button automatic switch and bottom rubber seal with foam cushion kit."
22 Please quote hydraulic door with installation. Aviation Hangar Project. I will also need a 30"x60" service door in each door. I just submitted for two additional door quotes...Those will also need the service doors in each. Please price hydraulic doors with install.
23 I would like a ballpark price on 1 and possibly 2 walk doors to upgrade my hangar. 40' wide by 11' tall hydraulic door.
24 This is a hanger for my cj2 but will likely have several other turbine aircraft hangered when finished. In the future will likely add a Citation XLS and want to be sure have door clearance for it. The hanger is currently sized with 24' sidewalls. Looking at a Schweiss hydraulic model, windrated with walk door, windows and remote opener.
25 Need pricing for a 40'x12 Schweiss hydraulic airport hanger door with windows, walk door, backup system and remote opener. Thanks
26 The opening on my existing hydraulic hangar door is 45' X 12' tall, which barely allows enough headroom for me to clear my planes tail through the hangar door. Because of that I would like to be able to use every inch of height or perhaps you can give me a suggestion as to how I could raise the height for a taller door so I won't be facing any big hangar repair bills to my door, plane or hangar in the future. I'm open to any suggestions you can give me.
27 Mike, At first I wondered if your guys at Schweiss Doors could repair my "other company" hangar door. Heck, they tuned it up so good it runs better than when it was first installed. You've got talented people working for you.
28 I'm considering buying a hangar at the local airport to put my King Air into, but this particular hangar door needs some major repair work and I'd just as soon replace it entirely. I would like to have a steel frame and steel covering (painted) Schweiss hydraulic door with a 46 wide 18 high clear span door. What total height and width do you need for the door installation and what are the header requirements? Send me an installed quote (to Mesa, Arizona) and I'll let you know if I want to replace it. I just think repairing it would be a bandaid and I have to keep working on repair headaches in the years to come. I've seen your Schweiss hydraulic and bifold hangar doors and am impressed with the quality you put into them. Thanks, Riley
29 Please contact me for a project in California. We are entirely revamping our airport hangars and wanting to put new doors on eight of them. Some need big time extensive hangar door repair, and the others that do kind of work we want to replace so they all look uniform, making them easier to rent out with a good quality Schweiss hydraulic door. Contact me and I'll give you the sizes and numbers. I have a few other questions to ask you too.
30 Interested in a 48' 12' opening Schweiss hydraulic door for a steel built Aircraft hanger. 24" wedge.
31 Need price for 55' x 17' hydraulic door. I'd like to have a stucco hangar door like the one featured on your website. I will apply the stucco,but thinking there is some prep work on your Schweiss factory end prior to this. Ship to Mesa Arizona 115 volt single phase
32 I was working on a bid for a aviation storage facility, which calls for Schweiss one-piece hydraulic doors, and I was wanting to talk to someone that could maybe give me a bid on supplying and installing the hydraulic doors or at least some insight on how they went together and what they expected the building installers to complete on the doors. Thanks
33 Hello, I am a member of a Hangar Association that has 14 T-Hangars all with Schweiss Bifold liftstrap doors at Merrill Field in Anchorage, AK. We now have a request for a hydraulic one piece hangar door, 40'x18' Can you give me a price on that with a walk door and windows. This is not a T-Hangar door.
34 Please call ASAP Tuesday. It will be a new construction building, wood-framed, but with the option of going with steel for the hydraulic hangar door frame for the door. Probably a man door in the hangar door and a few windows also. 99% sure I'm going to go with the Schweiss one-piece hydraulic door. North Pole, AK. (Last year I was entertaining the idea of a bifold door for a building down between Soldotna and Sterling, but have decided to build up here instead, so you may see last year's quote about a door for me...)
35 Looking for a 14X50 or 16X50 door - about to build a large hangar. Should I supply my builder with information from you before I start construction or wait until he's almost done. I do want to make sure the header he puts in can support a large hydraulic Schweiss steel door. Can you answer my question and quote a price?
36 70x16 and 50x16 Schweiss hydraulic one-piece aviation door quotes with wall mount power packs. Quote same size in bifold with straps and auto latch. 4 windows in 50 wide door 6 windows in 70 wide door. Summer delivery. Looking forward to getting your quality built doors. Thanks
37 I looking for a hanger door for a private hanger I'm building in Michigan. Opening 40'x12'. Looking to keep cost down, want to have a good sealing door at the jams, be able to insulate the door. I'm in the design phase of the project, want to determine the door I'm going to use, hydraulic one piece or liftstrap bifold, and design the structure for the door before we finalize plans. Call me for better explanation, thanks Dave
38 Hello...interested in both a one piece hydraulic door and liftstrap bifold quote for an existing steel 76-90 hanger at Kansas Airfield. I need a 16' clear height. Remote opener and man door. When will you have a Schweiss installation crew coming through here?
39 Quote on hydraulic doors please I have two metal building hangers I am quoting Both will have a door opening height of 20' clear. One will be 75' wide and the other will be 65' wide. Please include all hardware to complete the job installation with closures.. Customers have requested hydraulic tractor backup system. If another system will work better and not drive the cost up, please recommend and quote. Delivering to Mobile AL.
40 We are designing two 50' x 50' x 16' hangars and would like information to select the type of door, Schweiss hydraulic or Liftstrap Bifold, to include in the design. What Schweiss door are most pilots putting on a door this size.
41 I need a price on a hydraulic Schweiss Floatplane Hanger door 45 x 14 delivered to Spokane, Washington. I can do the install with proper instructions. Also include price for remote opener and two windows and a man door.
42 Hello, I am planning on building a garage/storage 40' depth x 60' length with requirement for a Schweiss Doors hydraulic door to clear my ultralight aircraft of 33' tip to tip wingspan. What would the door size you recommend? What is the detail cost? I like the hydraulic doors for their uniqueness plus an extra shade in the summer. Looking forward to getting this done this spring
43 I need to talk with your sales rep in the Tennessee Region about a price for a hanger and hydraulic door with windows for the Airport Authority located in Tullahoma, TN. Please have someone email or call me on my cell phone, below. Clear opening height with door open is 18'. Will need to know what upgrades you offer.
44 Please price the following bifold door with straps and autolock straps and alternate on Hydraulic one piece if possible. This is a insulated hangar door. I've seen a number of your doors in Ontario and am quite impressed with their workmanship.
45 Please send comparitive pricing for 45 ft 12 ft floatplane hangar door in bifold liftstrap and hydraulic models.
46 I would like an estimate for a hydaulic door. We are planning to build an insulated steel hangar at the municipal airport in South Dakota. The door size needs a clear open 63 feet width and 16 feet in height. Please Include backup power recommendations, cold weather kit. cost to ship/install Thanks
47 I have door that uses counterweights, springs, and cables. I'd like to get more clearance for a 185 amphib aircraft. The current door style is with 6'11" halves. The base of the header is 10'9". Hangar is located in Minnesota. Will your hydraulic door retrofit into mine.
48 I have an older hangar, cinder block side walls and corregated metal roof as well as bi-fold to the side manual sliding doors. The roof framing is lumber. The clear opening is 10' 6" and the height is 43' 9". My Cessna 172 is 9' tall and am looking to change to a 182 which is 9-4" tall on average so can't lose much for height. The door is on an end wall and the building set back some where either a Bifold or straight out hydraulic door lift could work. Certainly more interested in the hydraulic door.
49 We have been asked by the City of Redwood Falls to submit a bid to add a hydraulic door to the existing airport arrival and departure building we constructed for them in 2002. The building was constructed to add a future door where there presently are three overhead doors. The building drawings showing the framing and connection points are attached. The hydraulic door would be 50' x 17' clear opening. They are also interested in an alternate price for a hydraulic door, if it would work with the existing structure.
50 We are currently bidding a project for Southern California Edison which includes a new aircraft hangar with two hangar doors. Would you like to provide a bid for this project? If yes, we can send you all of the project information for you to review. We only want to put Schweiss hydraulic doors on this hangar. Our thinking behind this is being able to utilize the Schweiss pump system with its powerful motor and backup systems.
51 Contractors out of Fairfield Bay, AR, are bidding a project @ the Airport. We are asking for a price quote on a Schweiss hydraulic door per the included plans and specs. Please review the plans and specs. 1. Please give us a price for the door. 2. Please price hydraulic door installation separately. Wage rates for this job are attached.
52 I am familiar with your hydraulic and bifold doors with the lift straps, which I think are better than cables. Working in aviation for 40 years in Alaska I see them a lot. Everyone I have talked with likes the bifolds and hydraulic styles. I'm not sure which style I want for my new hangar, can you give me some recommendations.
53 I am a student pilot and looking at building a hanger later this year. My airport is out of hanger space, and a friend of mine hopes to operate a business in my hanger. I'm thinking the opening to be around 60'. I'm looking at both steel and wood and will want a hydraulic door for it. If you could send me some literature, "ball park" pricing on a single hydraulic lift door. I'd appreciate it. Also, any comments or suggestions concerning the building design, material, etc., for your doors.
54 I am interested in one of your hydraulic hanger doors. I believe you have a contractor who sells and installs the doors near my location in Fond du Lac, Wisconsin. Could you please give me the name of the person that is your dealer in this part of Wisconsin? The hydraulic insulated door I am interested in would be approximately 44X14.
55 Please quote on the following hangar doors one 80 foot wide by 14 foot high bi fold liftstrap door also two 39'x14' hydraulic doors just standard setup freight to Toronto, Ontario
56 We are needing another quote on a Hangar in the Calgary, Alberta area. The hangar has a 44 feet wide by 14 feet high opening. Can we get a quote for a hydraulic door for this opening? The quote should be FOB Calgary. I know everything is always a rush, but can you quote this ASAP? You guys at Schweiss are the best!
57 I am looking for a quote for a 40' x 9' (clear opening) hydraulic hangar door, the kind you have with backup systems. Our walls are 10', but I need a 9' opening. We are a flying club and looking at affordable options that will also be low maintenance.
58 I saw one of your hangar designs is similar to what I need, but the problem is, we plan on building them directly next to one another, I need an existing solution that allows me to open the hydraulic doors fully. Attached is sketch up , 3ds and 3d dwg format model of what I need the doors to do, or it can be a system in which the doors fold inside the hanger instead of out because of weather conditions, in such case at least 8 doors are needed instead of 4, also I was thinking of this hydraulic pump unit as it is only an eight meters high hanger door, for private planes. I can mount the pump anywhere within the hangar, right?
59 You've provided me with a quote on a bifold liftstrap and hydraulic aircraft door earlier this fall, approximately 11 foot tall by 38 foot wide. My building lot size is such that I'll need to incorporate a 9 foot wide vehicle door into the hanger door of approximately 40 foot wide and 11 or 12 foot tall (my ceiling height will only be 12 foot). Please let me know if this is possible.
60 We are looking at building a large size hangar and would like to maximize our door opening. We need an opening to be 150' wide by 28' high. We are open to suggestions as to whether a bifold or hydraulic one piece door might be best.
61 Please quote on (3) Hangar doors 40' x 16' high hydraulic door and (1) 40' x 14' high hydraulic door. Each door is to have (1) 3' x 6'-8" high metal door. Remotes, and insulation. Delivery to Ontario. Reply back to get the plans and specs.
62 I quoted my customer an airplane hangar 3 years ago with a competitors Hydro door. My metal building Manufacturer has told me they are out of business and to contact you for pricing. He also noted that Schweiss makes a better quality hydraulic door. Maybe that's why you have been in business over 30 years and he isn't. I need the 14' door height for my base bid, however I need to quote a 16' opening as an option. Also an idea of assembly time would be nice also.
63 Comment 1) Door opening height is now 11' and 9''. I MUST have at least 9'6'' clearance for tail of aircraft with doors open. So Schweiss recommendations on bifold vs. hydraulic are needed. Comment 2) I have pictures of hangar opening available to send if needed. Hangar has concrete floor. Question 1) Will there be any "Oshkosh Discounts?" Comment 3) Dimensions are given below :
64 I am beginning to look at building a hangar for my airplane. I would like a quote on both bifold and hydraulic one piece doors as I try to determine if and when to build the hangar. I am going to look at conventional metal buildings and at a quonset hut style also. I am researching doors first and will look at buildings after I have decided on a door. Thanks for your help, Monty M. 1978 Beech Bonanza V35B
65 Hydraulic Door needed for Airplane Hanger on 100' gable end of 80'x100' building at County Airport in Ohio. How soon could you deliver and install.
66 I am interested in a 50 x 14 hydraulic door. Priced with windows (8) 3' x 4' and without. We are in Soldotna, Alaska and also wonder about insulation options. I have a catalog from the Alaska Airmen's Show, so I don't need anything additional mailed to me. We are thinking of building (4) hangers and would make all of them the same size for simplicity. We don't know if we will build steel or wood. I'm looking at both and waiting for some pricing.
67 Quote for hydraulic aviation hanger door, opening 46x12. Prefer door with separate walk door, remote openers, windows. We can install door and place insulation on door.
68 Looking for door for my hanger. Hydraulic Schweiss Door. 50 ft by 18 ft, remote opener, photo eyes, warning horns and lights, what the ball park cost?
69 I live in Alta Sierra, California and have a small hanger which now has a sliding door on it. The door is 44' x 12' approx. I'm interested in your hydraulic door. I have a wood structure building and am wondering if it will also require a freestanding header. I can send photos if necessary. Do you have any prices I can look at. You did my neighbors bifold liftstrap hanger door and he recommended you. He really loves his door, and so do I, but I want a hydraulic one piece door. They are so quiet and I like the fact that they provide shade when in the open position. Thanks.
70 Need a 14 by 20 door price on a one piece hydraulic Schweiss door for our floatplane/ski plane hangar. We currently have a roll up door that is a pain, especially when there's snow that accumulates in front of it. Would like price to include remote opener and backup system in case of power outage.
71 I am putting together a budget for a general aviation hanger door in Idaho. They would like a hydraulic door ( 18' tall by 75' wide) with remote control, walk door and windows. This is just a preliminary estimate, so I really only need an approximate price for the hangar door.
72 I am interested in pricing a Schweiss hydraulic floatplane hangar door 50 ft opening with 16 ft opening in the wall. If the door opening is 50 ft by 16 ft what will be the door opening dimensions. Price with remote door opener.
73 Apologies, I previously submitted and forgot the door dimensions. 60' (w) 18' (H) I am an independent consultant and have a client located in the Scottsdale Airport. Interested in recieving a quote for a single piece Schweiss Red Power hydraulic door for aviation hanger. Thank you, John
74 Looking to build a single hanger for a Cessna 182 and a place to have our meetings. Might be interested in your hydraulic or bifold door as well, can you give me a quote on both styles with remote openers and autolatches.
75 We are pricing 2 hangars to be built in Peterborough Ontario. One requires a 50x12 bifold strap door and the other requires a 60x14 one pc. hydraulic door. Please include lead time, delivery and installation. We can supply forklift for the installation/unloading. I presume we supply the cladding? Will there be wood on the door to screw the cladding to? Will 8x8 wood posts be sufficient (with plenty of support framing)to fasten door to?
76 We need a price for a 40' x 10' hydraulic door to be used as a hangar door for a 180 Cessna floatplane. Door will need windows and a walk door and remote opener. Thank you Steve.
77 I would like a quote for an aircraft hangar (100' X 18'). The hangar currently has sliding doors and we would like to convert it to a Schweiss hydraulic door. I would also like a roundabout quote with windows and without. Also, how much would total cost be with the new pump and installation? Thanks
78 I built an 80 x 60 hangar and got a hydraulic door for it from you guys at SCHWEISS DOORS. Just want to let you know I'm very pleased with the door and installation was actually a breeze. You can use me as a reference anytime. Gary
79 I am in the process of building an aviation hangar with the following specs: -84 foot wide hangar with a door opening of 60 ft. -20 ft. walls with the bottom of the rafter at 20 ft.or lower to fit 18 ft. hyraulic door? -need opening door height -- minimum 18ft. -Laminated post building with _?___ minimum width between vertical columns to fit 60x18 foot hydraulic door. What would the estimated cost between hydraulic versus lift strap and autolatch bifold door with the above specs.? with 3 (24x36 windows installed) Delivered to Calgary, Alberta Canada.
80 Looking to get pricing for bifold liftstrap or Schweiss hydraulic door for aircraft hanger in new all steel building need 18' high by 60'wide in Pochantas, Iowa
81 I would like a quote on a hydraulic door for an existing hangar structure that has an opening of 39' 5"W x 10'10.5"H. I would like a simple locking man door with a window built into the door on the right side. The quote should include all material for installation and operation plus shipping. I've been wanting one of your doors for a long time, I'm finally gonna do it. Thank you,
82 Need 5 forty by 12 feet high aircraft hangar doors i have first of five buildings built need a hydraulic Schweiss door now please give price. Always satisfied with your quality doors and service.
83 I need a 40' door, for a 60' x 60' hangar. My kinfolks tell me you make the best quality hydraulic doors. Can you shoot me a price?
84 I need another hydraulic shop/hangar door delivered to South Dakota. Opening hydraulic shop door dimensions would be 40' wide x 13'9" tall. That height is to the bottom of the end rafter cord. The shop door building is a renovated pole structure. I'd like to get an order in and am ready to buy a top quality low maintenance Schweiss hydraulic shop/hangar door. I'd like another real good hydraulic door deal. The owner knows me from 35 yrs ago.
85 I would like a quote on a 16 X 40 hydraulic door . I am building a hangar in the Calgary area and I need a large, reliable hydraulic door that is custom-fit for my aviation building.
86 I am building a hangar this summer. I would like a quote for a hydraulic lift door. I will have a opening 50'3" wide and 18' tall. Please include pricing for your Backup System.
87 Need an 80' x 16' clear door for an aircraft hangar near San Antonio. Have a floor plan/elevation that I can share. Interested in a Schweiss Hydraulic lift door with your new powerful motor as I'll need the additional power for a large door.
88 New hangar construction at the local airport. Please provide a quote for a 42' wide hydraulic lift Schweiss Door to fit 12' side-walls. Door will be on gabled end of pole-barn type construction and should open to the full 12'. Please provide lift options from counter-weight to Red Power electric advantage system. Installation to be included. Finishing steel on outside of door will be supplied and installed by owner.
89 We have had a problem with broken auto-latch springs on one of your competitors doors. I have had one on each side break, and now we have had another one break. I'm fed up with it and want to replace it with a Schweiss hydraulic lift door fitted with your Red Power backup system. Please quote. Manager D&M Aviation
90 I need a price on one 60 x 14 Schweiss hydraulic lift door for an airport project in Maryland. Please include price for Red Power Electrical System and remotes. Thanks.
91 Please quote me both your Schweiss bifold strap door and a hydraulic lift door with remote open/close/locking options,(I am only looking for ballpark pricing now) for an aircraft hanger that is 80'x80'. I need 75ft x 16ft high clear opening and improved Red Power Electrical System to lift it. It will located at the Nashville Airport. Thanks!
92 We have a few Schweiss doors and they work great. We have a old sliding door too on our maint shop that we are looking to replace with a Schweiss hydraulic lift door. The door is 46' wide. Can you provide pricing for added Red Power backup system. Weather seal offerings (H1-H4), remote control for us for this 46' door shipped to Duluth MN? Thanks! Robert - Airport Duluth MN
93 I'm assembling a proposal for the construction of a new aircraft hanger in Quebec, Canada. Examination of traffic loads and the design criteria leads me to believe that two Schweiss hydraulic lift doors, of approximately 24' in height and 72' in width would be appropriate. Please also figure in your top of the line Schweiss Hydraulic pumps. I'm wondering if you would ship to this area (about 1 1/2 hours north of Montreal) and if you can give me a budget that I can work with for the financing proposal. Thank you for your time. Sincerely Steve
94 The County Airport located in NE Ohio Airport Authority is considering updating our main hangar building, built in 1967, by replacing our doors with a Schweiss hydraulic lift single piece door. One of our current customers is moving to a King Air 200 and the current door opening will not accommodate this size of aircraft. I've attached several files which show the current conditions with the building. The current door is only 57 foot wide x 16 foot opening. The door has 3, 20 foot sections and runs on a track. We are considering a 70 to 80 foot wide Red Power pump door with a 18 foot opening. This door will be south facing. We plan to use local contractors for the demolition and new door erection, including required foundations. We do have to enter into discussions with our tenant regarding the price of this modification and how will recover our costs. To do this, we would like to have an estimate that would provide us with a budgetary cost for the doors, hardware, engineering, and field service to direct the installation. I'm available to answer any questions you may have. Once we have decided what we want to do, we will invite the door supplier to visit our location to take any required field measurements and to present a proposal on your product and firm cost. Thank you for your help on this request. David
95 I'm with Southern Utah Doors in St George Utah. I am in need of some Schweiss hydraulic lift hanger doors in my area and was wondering if someone there could help me out. The sizes are 46 x 14 and 18 x 18 and 40 x 12. I have installed bi fold doors in the past but not a hydraulic door. Is your product difficult to install? Do you have installation instructions on it and your Red Power Electrical system? Any help is greatly appreciated. Jim
96 I have a client who wants to build a hanger, and the building manufacturer cannot design a building until I have door specs. Therefore, I need a quote on a door delivered to central Colorado. The door specs are 34'W x 8'H. I would want one of your estimators to price door with Red Power hydraulic backup system and remote openers. Thank You,
97 We are quoting a (4) unit hangar at the Dekalb Airport in Dekalb, IL. Please send me a quote for (4) Schweiss Hydraulic Lift Doors with opening size 44' x 14'. Doors will be mounted to steel jambs powered by Red Power cylinder of adequate strength. Your doors are the best!
98 We are working on a proposal for a airplane hanger and need a price for a Schweiss hydraulic lift one piece door. Size 40' x 16' for a 50' x 50' hanger building. The eave height will be 18' or 19' depending on the requirements for the door and the Pre-engineered building. We need a price fairly quickly with inclusion of Red Power hydraulics.
99 I received your quote for the airport project we are bidding on. There are (8) total hydraulic lift doors at the 44' x 14'. I think I just requested a quote for 4. Please revise for a total of 8 and also revise to include your new Red Power hydraulic backup system. Also need some information on the loads associated with the Schweiss door. Tom
100 I am constructing a hangar to accommodate lear jet and require a hydraulic lift door of 16mx5.5m.I would appreciate if you could let me know of what Schweiss Red Power backup solutions you have to offer. This is the third door I now have ordered from Schweiss Doors. No other door stands up and performs better than a Schweiss Door.
101 I am building an aircraft hangar and I am restricted on my building height. The building is 56' wide 50' long, and has 16 foot walls. It has a 2-12 roof pitch. The airport board requires a hydraulic lift door. I'm not sure if I can get the clear opening I need with a bifold door. I need a 50' wide clear opening with a minimum height of 14'. Is this possible with a Schweiss door. The door will mount on the 56' wide wall of the building. I would prefer the door posts be below the roof pitch, but they do not necessarily have to be. I was told to make sure and request your new Red Power hydraulics for this hangar. Please advise me on this matter. If I can get this clearance, then I would like a quote on this door.
102 We are in the initial planning stages for a new hangar development on our Airport, and are contemplating the use of the arch building. I am interested in exploring the idea of having a Schweiss hydraulic lift hangar door that follows the arch radius, which would eliminate the need to have a wider building and/or having the door frame overhang each side of the building. The end wall would have the upper fixed wall, and the lower part of the wall would raise horizontally. Maybe the hydraulic ram could be mounted on the floor and rotate and push the door upwards. I would like to explore the use of Red Power units since we would be building up to 25 hangars. Thanks, Rich
103 We have an immediate need for a 60' x 14' hanger door - hydraulic lift - one piece - Schweiss Door Red Power backup system - two remote door openers.
104 I had a Schweiss bi-fold hangar door installed in 2008. A fellow pilot I know wants to get one of your doors, but is more interested in your one piece hydraulic lift door. I told him to study your web site so when he orders, he will have a good idea what you offer in the Red Power backup system, and other accessories etc.
105 We are to install a 1 piece hydraulic lift Schweiss door for the New Jersey Depart. Transportation Aero Operations.The building has angle iron trusses made up of 4x4 angle iron. The trusses are 2' high on the ends up to 4' in the middle placed 64\" apart on center. I am thinking that the free standing header assembly will be needed to properly support the door. Can you offer any idea as to the ability to handle the weight/size of Red Power hydraulic pumps. As the installing contractor I will need an idea of the cost of the header assembly. The DOT is going to purchase the door. We will be supplying labor and extra material. Thank you for any information you can offer. Kenneth
106 Pricing on one 12'x42' one pce hydr. swing door prepped for skin 2 windows one remote, Red Power Electrical System, delivery to Airport in Gravenhurst Ontario. See you've sold several other Schweiss doors up here in Canada. Have heard they withstand our weather and winds very well.
107 I am purchasing a hanger at a local airport. The door opening is 44 feet. It currently has rolling (wheel) doors that are in less than ideal condition. My question is: What documentation/images do you need to determine if this building is a candidate for a Schweiss hydraulic lift door retrofit with Red Power backup system? I am also investigating the possibility of putting two 50'x50' individual hangers on the back side of this property for rental.
108 Gday, I am building another hangar at my Australian air field and wish to use Schweiss hydraulic lift Red Power pump doors. 48 ft opening. Can You Help??? Cheers,Paul.
109 I recently purchased a wooden frame hanger that has a 36w x 10'H opening. I need the most inexpensive hydraulic lift door option that Schweiss Doors provides. Please don't hold back on the hydraulics, I want your Red Power unit for best lift possible.
110 I am building a \"runway living\" home and need a price on a 38' X 10' Schweiss hydraulic lift hanger door with Red Power Safety Advantage System. Wood construction, luxury home. Want your one piece door to blend in, not stand out. Delivered to Washington State.
111 Our company installed a Schweiss door on a local runway living home. We have another customer building in the same area that will need a 42'x13' hydraulic lift door with Red Power hydraulic pump and I would like to get a quote to include an extra remote control. Sure like your doors.
112 I would like to get a general quote on Schweiss hydraulic lift one piece doors. I am in the process of designing a new runway living project. I don't know the exact size of the hangar yet, but would like to design it around a standard size door about 36' wide by 10' tall. Price with Red Power System and 2 remotes.
113 Looking for steel or aluminum hydraulic lift Hangar door facia to be white aluminum sheeting or possibly Hardie Board to match detached home.Want it with Schweiss Doors exclusive Red Power backup system and remote openers.
114 I am interested in a quote for a Schweiss hydraulic lift door with Red Power Safety advantage system. It will be used for a hanger on my new \"runway living\" home. I've scouted out your doors and design work. It is above reproach, best in the industry. You must be proud of your work and craftsmanship coming out of Schweiss Doors.
115 New construction, wood hangar with brick attached to home in runway living community. Need detailed info on concrete floor and footing required, also detailed end wall construction requirements for use by builder for Red Power hydraulic lift door which will be installed by Schweiss Doors..
116 We are designing a \"runway living\" home to go on an Airpark in France. We are looking for a door 40' x 10' Schweiss hydraulic lift door. We will need to skin the door with wood to match the house. We have enough headroom for a 2' wedge. Can you give us a cost for Red Power Electrical System if extra and a guess at shipping cost to Europe.
117 Designing new runway living home in an Airpark located in Texas. Garage/Hangar opening is 42' x 38'. Looking at either a Schweiss bi-fold or hydraulic lift door which ever will work best and lift best for my opening. Give details on Red Power motor please.
118 I need a hydraulic lift hangar door for a runway living home. It will need 12' open clearance X 40' wide. I need free standing steel mounting frame so I can build around the door. I want only your exclusive Schweiss Doors Red Power hydraulics for best lift.
119 We are planning a new runway home in Minnesota. I would like to get some information on the door options available along with a quote. We are looking to have 12'-6\" clear height requiring a Schweiss hydraulic lift Red Power System door and remotes.
120 Need price and specs on Schweiss hydraulic one piece doors to design openings for airport hanger. Need price on following doors. (3) 22ft x 55ft doors (1) 12ft x 35ft door. All doors are to be Red Power hydraulic pump fitted for optimum lift.
121 I have an opening that is 39'11.5\" with a height of 11.9\". I have a Baron that has a tail height of 9'8\". Can I fit a Schweiss bifold or do I have to have a hydraulic lift door? Kind of like your one piece hydraulic with Red Power pump. Can you give me a quote on both?
122 1. There will be a total of (10) doors: (5) 64'-6 x 18' (5) 55'-6 x 16' (clear openings) 2. Doors should include 230V single phase Schweiss Red Power electric motor system, push button controls, door seals, electric door latches, 3070 walkdoor in each hydraulic lift hangar door (10 total) w- standard lockset hinges etc. You guys at Schweiss Doors really know what you are doing when it comes to hangar doors. Customer satisfaction comes first.
123 I have a hanger needing a 40' Schweiss hydraulic one piece door. I'm using 2/6 trusses will a 2 ply truss still be efficient enough. Do your Red Power motors (pumps) come in different sizes adapted to different size doors.
124 Recently a Schweiss Door was installed at the Wausau Downtown Airport (Wisconsin). The owner is very pleased with the door and the lift strap system. The City of Wausau also owns a 100x100 aircraft hangar with a old hangar door mounted in a rough opening of 31'6 by 80' (28 ft clear height). The door was installed in 1977 and was manufactured by another hangar door company and has a cable lift system. We would like to inquire whether this door could be retrofitted with your Schweiss hydraulic lift door and Red Power pump. Please contact me to discuss the possibilities for retrofitting the door.
125 I need price quotes to supply & install new Schweiss hydraulic lift hanger doors on my old hanger in Squamish, BC. Existing door opening is 18' high by 40' wide with 24\" steel I beam header and 6\" dia. steel posts at each end. The rest of the building is wood frame with steel siding. We can not lose any of the width on the existing door opening. Photos available if required. I would like a quote for recommended Red Power backup system separately (if not included) as soon as possible.
126 Need a quote for the \"Hangar Doors\" for the Imaging and Outpatient Center, UNC Hospitals, Chapel Hill, NC. Price needs to include installation. 2 - Openings 22'-2\" x 14'-0\" Vertical hydraulic lift Schweiss doors each consisting of a Red Power electrical motor operated door system. Please respond with email address so I can forward complete specification.
127 I need to get a quote for a 60'w x 20' tall Schweiss Doors hydraulic lift door for a aviation building, w/ metal exterior. I am assuming we put the mtl. siding on the door? Also do you have some one who has installed Red Power electrical systems on these \"Correctly\" in our Montana area?
128 Hello, we are very interested in knowing about your hydraulic lift doors with your Schweiss Red Power backup system. The opening of the hanger is 15 feet 1 inch high and 95 feet wide. Is it possible to have a hydraulic door of this size, will one Red Power motor lift it? I hear your pumps have the power.
129 I Am working on an eight unit airplane hanger with 50' wide hydraulic lift doors, and a height of no less than 16' 6\". I need a quote for eight doors with optional ALUMINUM and STEEL, Red Power hydraulics, and with and with out windows.
130 This door is for an aircraft hanger attached to a residential home. The fascia will be wood. I would like a price quote for both the Schweiss bi-fold and hydraulic lift doors. The latter to be affixed with Red Power hydraulic pumps.
131 We are designing an aircraft hanger in Helena. We are not sure of the size Schweiss hydraulic lift door we will order and need any information that you can provide that will help us plan this building and also stats on the Red Power pump that comes with it.
132 We are currently designing a hanger to be built at our regional airport. Requesting information about your doors that will help us complete the final plans. At the present time we are planning an 18' x 60' Clear opening Schweiss hydraulic lift door with Red Power backup system installed.
133 I am pricing out some commercial hanger real estate and need to put together a building and door budget. Please send me a quote on a 60'x22' insulated Schweiss hydraulic lift door. I would like a quote for Red Power hydraulic pump and a quote to have your crew install the door. I recently installed two of your bifold strap lift doors at the Rhinelander airport and they went up faster and easier than I thought!
134 I am going to build an aircraft hanger, the opening I want is 60' x 18' clear to enter the hanger. I would like your input and a quote on a Schweiss hydraulic lift door. Be sure to include price with Red Power hydraulic pumps. I don't want one of those little black jobs. Go big or don't go at all.
135 My neighbor recommended your firm and product. I am building a new hanger and need a hydraulic lift door that is 46' wide by 14' tall. He said your doors come with Red Power hydraulic pumps. Need the specs to give my building company to make sure they build the opening correctly.
136 Interested in a 44 ft by 14 ft Schweiss hydraulic lift door. Please send price quote with Red Power hydraulic pump. The door will go on an existing hanger with open front. We also have real estate next door which is able to handle a 60 ft wide hanger.
137 We are building hangers this year on some airport real estate, and would like a quote on the Red Power equipped Hydraulic Lift door to fit a 50' X 14' opening. Price to include everything, especially your Red Power pump for good lift.
138 I am planning on building a steel constructed hanger this fall with a hydraulic lift door opening about 50' X 14'. I will currently store my 170 in there but am thinking of resale value if I ever decide to sell the hanger or renting it someone with a small twin. Also, can you give an idea what an insulated Schweiss Red Power motor door would cost me.
139 Please quote a 54' x 16' Schweiss hydraulic lift hanger door with auto latches and remote. This is to be installed on a wood pole building hanger. I would also like a price on the one piece hydraulic door if it can be engineered into a wood pole building. Both prices should reflect Red Power hydraulics.
140 I am constructing a hanger for my Zenith CH701 and need a one piece hydraulic lift door that will fit a 30 X 10 foot opening (rough). What is the approx. cost of doing this? Does it come included with Schweiss Doors Red Power backup system, or is that extra. Thank you, Red Auerbach
141 I am building a hanger home and need a price on a 38 wide X 10 tall Schweiss hydraulic lift hanger door with Red Power hydraulic pump. Wood construction, Delivered to Washington State. See a bunch of your quality built doors up here. Not only on hangars either, but some for store fronts.
142 Yesterday you emailed a door quote on a 45'x 12' hydraulic lift door for a hanger I'm building. I made a mistake on the size. I need a quote on a 40'x 12' door and forgot to mention that I want your Schweiss Red Power hydraulic pump on it. I apologize for the mistake. Doug Van Osten
143 I am interested in building a residential airport hanger and would like to know more about your Schweiss bifold and hydraulic lift doors. Did I read somewhere that your hydraulic doors now come \"standard equipped\" with your Red Power Systems? That's a heck of a deal!
144 Looking for a Schweiss bi-fold or hydraulic hanger door for a 40 foot wide opening. I prefer the hydraulic lift door with Red Power backup system. Price will depend on which I order. Either way, I know I will get a quality product from your experienced, tried and tested company.
145 In the planning stages of building an aircraft hanger and need a price for the Schweiss hydraulic lift one piece door. An adjacent hanger has one of these doors with your Red Power hydraulic backup system and he swears by it. He says Schweiss Doors are better than any others on the market. Been seeing more of Schweiss Doors in Texas.
146 I have a hanger in Gold Beach, Oregon, with one of your doors installed. 2003 was construction date, hanger is 54' x 56'. Can you give me the size of a hydraulic lift door installed, and any Red Power hydraulic pump requirements for the door? We are also interested in the installed cost if we were to add a Schweiss door. An approximate price is OK, we are not looking for a firm bid at this time. Bill
147 We are building a 10 unit hangar in OK. please price different options for a 44-6 X 14 Schweiss hydraulic lift door opening. Please break out installation if you do offer it. Please breakout price on Red Power hydraulic pump if not included. Thanks, Lance
148 I am preparing a bid on 80 x 80 x 24 hanger to be constructed in the Baraboo area. Because this is so large I am not sure how many doors will be required and how much Schweiss Red Power hydraulic pumps will be needed. Can you call so we can talk. Ray
149 18 hanger doors, various size from 23 to 48 ft. wide and 12 to 14 ft. high.in both Schweiss Bifold and Hydraulic Lift with Red Power hydraulic design formats. Extra remote door operators will be needed for most of these doors. Can you handle this big order and what would our time line be?
150 If I want 13' clear span opening to allow for a 12 3/4 airplane tail access, how high will the eve have to be on the building to use your Schweiss hydraulic lift door? The exterior dimensions of building are 50X50 steel frame clear span. Will want Red Power hydraulic back up system and two remotes.
151 We are bidding two projects with aircraft storage that require Schweiss hydraulic doors. The projects are as follows: T-Hanger Park Panama City Airport Authority Panama City, FL and Taxi-way and Aircraft Storage City of Brewton, AL Are you aware of the projects? We want you to submit proposals for teh doors with Red Power Units?
152 We are building a domestic airport and looking for Hanger Doors prefereably your Schweiss hydraulic lift style with Red Power hydraulic pump. The size of the door should be 35 Meters in width and 10 meteres in Height.
153 We have purchased a double unit hanger that we are installing in Colorado Springs, CO. The Schweiss doors are 18'-3\" x 60' hydraulic lift with Red Power Electrical System. Could we please have an installation manual. Because of weather delays we will probably not have the doors shipped until late July and would like to study the manuals. We have remote controls. The 2 doors are of different heights because of sloping site conditions. Please forward by e-mail all literature that will help us understand the installation, maintenance etc. Can't wait to get your rugged door in operation. You make life easy.
154 I am getting a preliminary price for a 60' x 60' x 16' airplane hangar in Upton, WY. They are interested in a 50' x 12' Hydraulic lift door. My building supplier needs to know how much more we need to allow in his estimate to accomodate the Schweiss door with Red Power hydraulic backup system. This is just a starting point, but we would like to be fairly accurate in our estimate. Thanks for your help.
155 We need to get a Schweiss Door estimate on your new Red Power hydraulic lift pump hangar doors, they are 75 long feet by 21 feet tall. Can you send us a quote. Thank You Sarah
156 I need data information for door size (60' wide X 18' Clear). This project is (2) unit hanger building with future expansion. Project for Airport and will be located in Nevada. Each Schweiss hydraulic lift door will have (2) 3'x 3' window and (1) 3070 man walk-in door and Red Power hydraulic pumps. I do not need pricing only data.
157 We need Quote on Bid project for a Kentucky airport hanger for Schweiss hydraulic lift doors as per specs. Doors should all have Red Power pumps, the biggest one you provide for best lift. We've ordered doors from you before and are very satisfied with their smooth operation.
158 Please provide an approximate cost for a Schweiss hydraulic lift door spanning 61' x 16' for a hangar located in NM. Request Red Power backup system. Your doors are showing up a lot here and I've seen several in Texas too. They appear to be top of the line. Thank you, Barton L. Tate
159 Please make a quotation for Schweiss hydraulic lift hangar doors only frame and Red Power electrical mechanism. 10 items 3,5m x 11m cleared doorway, 2 items 3,5m x 12m and 1 item 4m x 17m. Metal cowering will be on the place with corrugated steel sheet 0,7mm. Include please shipping costs and term for production. Thanks and best regards
160 WE ARE LOOKING FOR YOUR DISTRIBUTOR IN ONTARIO. A PROJECT WE ARE PROPOSING REQUIRES TWO SCHWEISS HYDRAULIC LIFT DOORS. 1. 1 DOOR 50' WIDE BY 12' HIGH OPENING 2. 1 DOOR 100' WIDE BY 20' HIGH OPENING. THESE SIZES ARE APPROXIMATE AND CAN VARY SLIGHTLY TO ACCOMODATE YOUR STANDARD SIZES. TECHNICAL SPECIFICATIONS, DESIGN DATA, AND PRICING FOR RED POWER HYDRAULIC PUMP WOULD BE APPRECIATED. THANKS
161 Price for a 40 by 14 hangar hydraulic lift door on a wood construction building. Looked at your Schweiss Doors web site which sold me on your new Red Power hydraulic pump. This door needs the best Schweiss Doors can offer for good lift.
162 Need pricing for Brainerd Airport Hanger. Large 60 ft. door in need of a Schweiss hydraulic lift door and Red Power hydraulic pump. Can we also get an extra remote door opener. I see other Schweiss doors here. They really work well in cold and windy conditions. You guys put out a great door.
163 Looking at building several hangers and would like to understand your Schweiss hydraulic lift door system with Red Power hydraulic pumps for best lift, schedule & pricing. This is for a big job in Nevada. Have seen your doors. I'm sold on them. Top quality and very functional hangars.
164 Looking for information on aircraft hangars for general aviation aircraft. 50 x 50, 60 x 60, and 60 by 80. Our plan is to build 38 of various sizes in 3 to 5 unit buildings. 60 x 80s are planned for business uses and will have additions for office space, so they would have to be Schweiss designer doors. The others would be standard hydraulic lift doors with Red Power hydraulic systems and remotes.
165 Please call regarding the replacement of a sliding door on a hangar located at the Calgary International airport. We want to replace it with a Schweiss heavy duty aluminum hydraulic lift door. How does aluminum stand up as a wind loaded door. Regardless, we do want Red Power hydraulic pump. Your doors are time tested.
166 After a price for another Schweiss quality hydraulic lift door that folds upwards for a hangar. Can you supply: 1)Drawings for the door system 2)Approx Manufacture & delivery time Do you supply a manual on the installation of the door and Red Power Electrical System for our Australian installers? Cheers Look forward to hearing from you from your buddy Down Under. Nic
167 I have a couple questions about your airport hanger doors. We are pricing one for Angel Flight, which is a charity organization in our area. 1. Does Schweiss Doors install these type doors? Our location is in the Atlanta area Airport. 2. What is the cost difference between bifold and hydraulic lift doors with Red Power hydraulic pump? Our door is approximately 90' wide by the normal height which I'm guessing is about 30' high. 3. Do you make all glass or plastic (translucent) panes in lieu of mostly sheet metal?4. What is the cost difference for the all glass/plastic vs metal? Thank you, Bogue
168 My Wife and I have handling sales at the Orlando/ Airport since it's inception in 2003. We actually used one of your Schweiss bifold doors on our family's hangar. My issue is this, I need an approximate price on a 60' x 18' hydraulic lift door. Nothing exact, just an intelligent estimate. We are considering building a larger hangar and are trying to come up with an approximate cost. It would have to be fitted with Red Power hydraulic pump. .Thank you, Sid.
169 I am bidding the NC hanger project and need a price on a Schweiss hydraulic lift hanger door. 80' wide with 20' clear height and exterior panels with vinyl faced rigid insulation inside. Red Power backup system.
170 Do you have representation in Florida? I would like to obtain a quote for my quonset style hangar for a Schweiss hydraulic lift door verses the current slider doors. By the way I am in Kuwait so we need to work via email until I am home on leave. I see by your web site you have a new Red Power hydraulic pump motor. Thanks, Mike
171 I would like to get some pricing as well as more detailed information on your Schweiss Red Power hydraulic pumps. Thank You Bo. I have a 60' x 16' hanger that I would like to get priced with a hydraulic lift one piece door with backup system.
172 Send me your bid for the six hydraulic lift one piece hangar doors for the Richland County hangar job. Don't forget, I asked for the Red Power hydraulic pumps for each door. Extra remote openers for each door as well. Looking forward to doing business with your well reputed Schweiss Doors Company I have heard so much about.
173 Building new hangar, 45 x45 with 16' eves. Wood pole/truss const. Door 42 wide by 15 high. In design stage. Need quote on Schweiss hydraulic lift style door with Red power backup system, delivered to Salem, Oregon.
174 I am building a wood pole barn for my Cessna 175 airplane and would like a hydraulic lift door. Outside dimension will be 42'. What size post do I need at the corners? Are there any structural requirements for the opening header above the door? Are there any other structural considerations needed for your door? What Red Power hydraulic system electrical requirements 110v or 220v? Is there wireless remote control to operate the door? Thanks
175 I am in the process of getting ready to construct a 50x60 wood framed metal sided hanger with a 16'x 46' door on the 50' wide end. Would like a price Quote on a Schweiss hydraulic lift door fitted with Red Power hydraulics and delivered to Maine. Please email this info and any design specs that will be needed to support the door. Also could you provide me with the expected clearance I will get in the full open position. Thanks, Richard
176 Dear Schweiss Doors, we are building a hangar and are looking for a one piece hydraulic lift door which won't reduce the headroom available. The hangar is a bricked up steel construction with wooden roof truss. The eyelet: with 19.1 m (62 ft 8 inches) height 5 m (16 ft 5 inches) All Red Power electrical lift device should be designed for the European standard which is 400V/50Hz! I am looking forward to your offer. Best regards Pavel S.
177 I have a polebarn/hanger that I want to put a Schweiss hydraulic lift door into. My end of the hanger is 32 feet wide by 12 foot high. What would be my cost and specs for the door with Schweiss Red Power electrical system installed?
178 I HAVE A CUSTOMER WHO WANTS TO BUILD 2 HANGERS 1 IS 50'WX75'L I NEED TO KNOW THE WEIGHT OF THIS DOOR TO GET TRUSSES MADE CORRECTLY TO SUPPORT THE WEIGHT OF A SCHWEISS HYDRAULIC LIFT DOOR WITH RED POWER MOTOR. THE OTHER HANGER IS 75'WX75'L THESE ARE BUILDING WIDTHS. HOW MUCH OF AN OPENING CAN I GET WITH THESE DIMESIONS? I LOOKING FOR THE LARGEST OPENING POSSIBLE. THANKS, MITCH
179 We recently purchased a 60'x60' hangar in Mesa, AZ with a 60'x19' Schweiss hydraulic lift door. For accounting purposes, we need to know the replacement cost of the door. Other specifics on the door are the Red Power hydraulic lift system, which incidentally, works great. You were right!
180 This is a request for information/advice on adding one of your Schweiss hydraulic lift doors (with Red Power hydraulic pump) to a pole style building (aircraft hanger). I am in the planning stages of the building, and the tentative information I have is this... 42' wide, 45' deep, 14' eve height and 12' x 40' opening, internal truss door. I'm not sure these numbers will work. Do you have previous builders using your doors with about the same dimensions? Could you suggest a better size? My minimum accecptable clear door opening is 38' x 11'. As soon as I finalize the size I will request a quote, fob Seattle, Washington. Thanks, LeRoy.
181 I am planning to build a 60 x 60 Post Building to use an an Aircraft hangar for my Harvard and 180. I would like two things; A quote on a 48 x 16 Schweiss bi-fold and hydraulic lift door, and shipping up to Alberta Canada. Your brief advice on the pros and cons of both. I've read your information about it but am still uncertain which would be best. I understand that I would lose height with a bi-fold. Frontal area however is not a factor for me. As well I am interested in a possible sidewall application of the same size door with Red Power hydraulic pump and backup system. If I do this then I can go as big as a 60 x 80 hangar. thanks, Chevy.
182 In the early stages of designing a building for our customer. He wants a private hanger with a 50' x 14' hydraulic lift door that I will design the building around and at this point I'm just looking for technical information for the building design. 1. What do you recommend for framed opening size? 2. How much room do I need to allow above the door for the header? 3. What are the weights and forces that I need to apply to the building? 4. From looking at the pictures, it appears that you just supply the frame work and we apply the panel to match the building. Is this correct? 5. Do you insulate the door or is that our responsiblity? 6. Any information that you can provide that will help with this design and Schweiss Red Power Electrical System would be appreciated. You can email me at the above email address, or fax it. Thank you, Donny K.
183 Red Power Schweiss One Piece Hydraulic Lift Hanger door 66M W x 7.0 M H x 5 doors 34M W x 7.0 M H x 1 door 27M W x 7.0 M H x 1 door. Can get with Red Power backup system and an extra remote opener. Shipment by boat to Hong Kong quotation.Thanking be to you, Wei Chung Ho
184 Gentlemen; I bought 4 strap operated 45 foot wide 240 Volt doors thru Schweiss Doors for installation at the Arizona airport. I lost the plastic barrell shaped insert that goes into the gear reduction assembly while installing the motor. I notified you of this and you sent a new one to the above address. I took it to Montana and am embarresed to say that I promptly. Can you please send another..I promise to be more careful! BTW, our next project is for 8 hydraulic lift doors at the Mesa Airport. Your door worked \"GREAT\". Contacting you again soon.
185 Want to price out a Schweiss hydraulic lift door plus some Red Power pump options, I want to price a 3' walk in door, top override juggle switches, Three button automatic switch, door base safty edge. This is for a new airport hanger, and I have to bid this door on Wednesday.. Sorry for the short notice, but if you could, I would appreciate it. Thanks a lot.
186 I am having an aircraft hanger constructed (to be used for the storage of 2 sailplanes). The hangar has 6x6 wooden side columns, wooden roof trusses and will be covered with metal cladding. The size of the hangar is 60feet wide (front end) and 40 feet deep. I am very interested in a hydraulic lift front door with size 55 feet wide and 12 feet high. The door will be covered in metal cladding like the rest of the hangar. I would also like a standard size man door included in the bottom left corner of this hydraulic door. Could you please send me a quote for: 1) The cost for the hydraulic package and the door (with shipping and handling included) and 2) The cost for the Red Power hydraulic pump package only for a door of this size with shipping and handling included. Sincerely, Rico.
187 I installed a new Schweiss lift strap bi-fold (40X13) with auto-latch on my hangar last summer. I'm toying with the idea of adding the remote opener. What is the price? More importantly, I'm buying a new hangar which I want to put your Schweiss hydraulic lift door on to replace a sliding door. How much would that run me with your Red Power Hydraulic pump and installed by you? It will probably be about a 40 ft. door.
188 I am doing a design/build project for the Department of Horticulture and we are interested in putting in your hydraulic lift one piece Schweiss hanger doors. the opening dimensions are three bays of 15' wide by 14' tall. Possibly just one door at 45' wide by 14' tall. I would love to possibly send you a section to see what options you think might be best and will also want your recommendations on Red Power Hydraulics and cost of extra remote openers.
189 I am building a 60ft x 65ft hangar and would really like to use your hydraulic lift door ... 45ft x 16ft. We fly microlights and hence are working to a very tight budget. Final planning will be in the next few weeks and we hope to be built by late spring The building is steel frame with single steel cladding. Can you give me an idea of what your very best price might be w/ Schweiss Red Power hydraulics?
190 I am planning a new building project which includes a 40'-50'x 16'-18' door. We currently have a 56' sliding door that is about 25 yrs old installed in an uninsulated hanger. I don't have a good feeling about installing a large bifold in an insulated shop so prefer the Schweiss hydraulic lift door. We are in SE North Dakota so I pay enough of a heat bill as is. Do you feel that a hydraulic doors has benefits here? Looks like your Red Power pump is the way to go. Looking for info to clarify my decision.
191 I'm starting my hangar const. this week and will be needing a door for an opening of 40'x10' I would like a quote on a Schweiss bi-fold and one piece hydraulic lift door. I would like to maintain the 10' height. Hydro-Lift door should be fitted with Red Power system for good fast lift.
192 I have a customer who is in need of a 55' x 15' one-piece hydraulic lift door for a hanger he is building. He is specifically requesting a Red Power back up system and extra remote opener. It will be a solid door (no windows)and mounted to steel. I need a quote that includes delivery and installation here in Sherman,TX.
193 Dear Schweiss Doors, I am a student at Niagara College, We are designing light airplane hangars for a client. We're most interested in your hydraulic lift doors, the opening is 30' x 10' and the building is pole barn construction. I need to get some information on the bi fold door too. I will need to know the weights of these doors so I can calculate the size of beam and columns I would have to use, how do I attach the door to the beam and any recommendations that you may have. Also send me all detailed information you have on your Red Power hydraulic pump systems. Any help would be greatly appreciated. Robert.
194 Dear Sirs, I am interested to import several doors for maintenance and T-hangars. Are you delivering doors to Europe? Do you have dealers in Europe offering your doors and instalation? I am kindly requesting quote on Schweiss hydraulic lift, Red Power hydraulic pump one piece door 60 x 18 ft with transportation costs, but I can consider some other door dimensiones if this size is too large or extremly expensive for transportation (please advise the sizes which suites the best to the container. Best regards, Domagoj C. PAN AVIA d.o.o.
195 We are in the process of designing an aircraft hanger for a client, the hanger is 25m x 2 span and requires a 6m high x 18m wide opening, I am wanting to find out all relevant information re fitting and loads so I can pass the info onto our designing engineer. remote control, Red Power hydraulic pump driven. 2 doors in total wind class 45min per second. Could you please also supply me with a quote as we have need for a high quality doors suitable for these applications. building is made from steel, cold rolled pulins etc etc. Thank you Schweiss Doors
196 I have an 80x80 hangar with a 50 ft bi-fold door. I bought an Air tractor 502 that has a 52ft wingspan. I would like to remove the existing door and replace it with a 60 or 65ft Schweiss hydraulic lift door and utilize your Red Power hydraulic pump for good lift. Can you handle this, what more should I do?
197 I am building a hanger 40' by 48' with a wall height of 14' I am interested in a quote on your Schweiss hydraulic lift door. I need the door at least 13 by 38, and my husband said to emphasize that he wants your new Red Power hydraulic pump. Nothing else will do! What Charlie wants, Charlie gets :) Thanks Clarissa
198 Our company is looking at bidding a job to replace fourteen 42' x 14' sliding doors on hangars in Galveston, TX and I wanted to find out the cost of your Schweiss hydraulic lift doors with Red Power hydraulics and backup systems / extra remote openers. I can send a copy of the specifications to clarify the door requirements. Installation by Schweiss Doors just outside Oklahoma City. Thanks, Matthew E.
199 I am wishing to purchase 4 hangar doors. The openings are framed with 8\" steel pipe (verticle) with an overhead I beam 6\" wide by 18\" high. The inside dimensions are 12'high and 40' 11 1/2\" wide. However, I feel the Schweiss door would be best suited to be hydraulic lift, Red Power hydraulic system, mounted on the top header I beam. The door then would need to be 41' 8\" wide and the height would be based upon the mounting onto the I beam. This is a project I am interested in moving forward with in the near future. Thank you, Jed
200 I am looking for a cost on two hydraulic lift Schweiss doors for the capital city airport. I need one for the main hanger to replace a sliding door to be a 80' 0\" x 15'9\" opening please do with Red Power hydraulics, complete weather seal package,& Safety eyes. I need a cost for the other to replace an existing rolling curtain type door. This opening is 68'6\" x 15'6\" Please figure this door the same as the one above. Your hangar doors are above reproach. Keep up the good work.
201 Aubun airport, Door height of hydraulic door that will accept 16'8\" king air/citation type airplanes... the hangar size is 60 deep 70 wide. Looking at aprox 50' door width. Walk-through door is in building. I think we are looking at the hydraulic door with your Schweiss Red Power pump. Can you give some idea of the cost difference of different heights?
202 I have a customer actively searching for a Schweiss hydraulic lift door. Our sliders for that particular model are not big enough to accomodate her airplane. She has solid, corrugated steel endwalls and she would like at least a 10'HX40'W door system. What are our options? It is a quonset, 54'WX15'H in the center. We may consider something possible in Red Power automatic system as she wants something easy to open as she continues to age. Please email me or call me as I would love to discuss options and, of course, pricing.
203 State of Alaska has published for bid a hangar located in McGrath. I can email you the requirements but need a bid price for one (1) Hydraulic hangar door, 50'x14' with Schwiess Red Power pump opener. Wind load - 120 mph snow load 90 psf Siesmic Zone 4. Need price, weight, size, dimmensions Seattle Dock. Thank you,
204 Need a price quote and spec sheet for a 58x10 hydraulic door for an airplane hangar located in Hayes SD. Am bidding out this customer, need an engineering spec sheet for the door and accompanying Red Power pump so that our engineering dept. can design building to accomodate this Schweiss door
205 I plan on building a new private field hanger for my RV-9A airplane project. The airplane should be completed sometime soon (within 2 months) at which time I will want to have my hanger done. My inquiry is for a cost estimate for your hydraulic hanger door with your Schweiss Red Power hydraulic pump, based on this aircraft size and the building general specs. Please include estimated lead time and shipping.
206 Looking at building a hangar and need a general quote for a hydraulic Schweiss door with a Red Power backup system and a couple of remotes. I'm located near your facility in Minnesota, so you know I will want this door insulated. I sure see a lot of your doors around the state, and not just at airports, a lot of farmsites and some residential. Apparently you have a pretty darn good door.
207 I have a customer wanting a quote on a hanger, and was looking in my AOPA magizine and found your ad. I am meeting with the customer in a couple of weeks to discuss his options on Schweiss doors, and would need an idea on price for bi-fold and hydraulic type doors. I also would like a price on a free standing header as an option. The doors would be sheeted with 26ga. metal and can be installed by me. Would I have any trouble following your instructions to install the Red Power Electrical System? Thanks.
208 Building a 50 X 50 wood frame hanger planing a 40ft door opening For a Schweiss hydraulic metal door. Must have minimum 10ft overhead clearance for door. What ceiling height or bottom of truss height will I need? What size Red Power pump will it require? How much for a Red Power backup system and extra remote opener?
209 I am planning on building a hanger either 50X50 or 50X60 with either 12' or 14' height walls. The height will depend upon which door I choose. I will plan on a 45'or 50'door and either 12' or 14' high. I prefer the Schweiss hydro swing door at this point but will have to see the cost difference in the doors and in the building structure costs depending upon the door used. Please send me information on the door pricing and the framing requirements for installation of each type of door. It doesn't cost extra for the Red Power pump, does it? Thanks, Therold
210 We are building an airplane hanger. The building will be about 70X70 feet to accomodate up to four Cessna 172 or 182. We need a opening at least 40 feet across and 10 feet high. What would something like that cost with one of your Schweiss hydraulic doors on it? Maybe the lowest I could possibly pay and the \"Cadillac\" price with all your Red Power hydraulic system accessories. Then I will know that there will be something in the middle I can plan on. I want a door that I have to open with a door opening system that has real good lift.
211 I would like a quote and information on a Steel Hydraulic Door for my hangar I am building. The size would be a 40' x 14'6\" (12' clear). I would also like to know what size Schweiss Red Power hydraulic pump to order and what time frame I would be looking at once an order would be placed. Please contact me at the above cell number if you need further information. Thanks.
212 Hello, I am a student at an aviation college in Toronto, Ontario, Canada. We have 3 hangers with old sliding doors. Our college is looking into upgrading to hydraulic or bifold doors. I was wondering if I could receive a catalogue of the various doors, strap systems and Red Power hydraulic lift systems, as we don't know what type of doors to go with. Thank you Suzanna P.
213 Dear Sir, We presently own two Dornier 228 - 200, which we are building two hangars to have them and for maintenance in those two cities. We would like more information on your Schweiss hydraulic one piece doors as Red Power hydraulic pump technical and prices. Regards, Pedro L, Lisbon
214 We are building a 48' x 75' hangar and are interested in getting a quote for both a Schweiss hydraulic and bifold door. We are also considering going to a 70' wide door and would like to get the price adder for going from 50' wide to 70' wide on both doors with Red Power hydraulic units for good lift. Thanks in advance for your efforts
215 I Can deliver you the production to Russia (city of Novosibirsk) and mount on a hangar? 2. We would like to receive your all prices: manufacturing, delivery, installation. 3. Work of Schweiss red power pump mechanisms of opening of doors at temperature: a minus - 35 degrees on Celsius and preservation of temperature in a hangar at these low temperatures. 4. How many time occupies(borrows): - manufacturing of gate - of 14 metres width and 5 metres height, - delivery, - installation. With hope of early(fast) reply Chusovitin I. Director of Project
216 Hi - I'm looking for a estimate on: - 1 or 2 hanger doors (still TBD, just wondering if there is a pricing difference on hydraulic doors and Red Power Systems if ordering two) - 60' wide - 21' clearance Please let me know if you have additional questions.
217 I keep seeing adverts for your Schweiss hydraulic and bifold hangar doors in light aircraft press here in UK. My hangar is 48ft wide and 9 ft high (approx). I have been quoted 186000 tax (sterling) in the UK (supply and erection). I guess that is around $40000 (US) which seems a reasonable price to pay considering the quality of your doors and now your new Red Power hydraulic pumps. Do you supply in UK? I keep my aircraft on my farm not on an airfield.The buiding is steel framed self built 30 years ago 60ftX48ftX9ft and has just been reclad and insulated. Sincerely Tony P. They nicknamed me \"Pippa.\" I'm better looking than her and I can fly.
218 I would like an estimated cost for a hydraulic door for an existing hangar with a 38' x 9.5'( -) clear opening. It would need to be mounted in front of the building which now has sliding barn type doors. Have price reflect Schweiss Red Power motor and one extra remote opener.
219 We are looking to replace an existing 97' wide x 24'high (18' clear) door on a hanger building in Kalamazoo, MI. We are interested in your Schweiss Red Power hydraulic pump system also if it is appropriate for a hydraulic door this size. Please contact me with budget pricing and any information you can offer for structural requirements. Thanks!
220 Good day I am working on a hangar project for a customer .I was looking for some budget numbers on a 60 ft x 16 ft Schweiss hydraulic door with Red Power backup. I'm seeing more and more of your doors here in Alberta. Everyone I talk to seems to like them very much. Delbert
221 We are in the process of building a hangar. We require a Schweiss hydraulic one piece door 44'long and 12' high. We require a Red Power hydraulic pump opener and remotes. Please provide a cost for the door shipped to us, the required opener, and the estimated time to install.
222 Hello, I would want to know if you can sell us a hydraulic Schweiss door(s) for a portable or mobile hangar for a Boeing 737-200 aircraft. We would require it be lifted using your new Red Power hydraulic pumps and have a backup system.
223 Getting ready to put up a 56' x 56' hangar with a 10' x 40' hydraulic door on each end. Looking for least expensive Schweiss Red Power system doors. Manual backup system if possible is fine, if available. Thanks, Pete
224 Im interested in buing and installing Schweiss hydraulic one piece doors to our hangar. We are operating Beechcraft 350. What kind of door do You reccomend, steel or aluminum. Maximum size of oppening avilable is 40 m width and 10 m high. But we can install smaller doors. Please send me pricing with Red Power hydraulic pump and backup system, and remote, shipping costs to Warsaw, Poland. Regards, Mr. B.
225 Hi, I'm looking for a one piece hydraulic or bifold door for a hanger building. The Hanger building is 150'wide X 150' deep X 30' tall. Can you please email me the styles that you have and the prices to ship to Greece, also information on your new Red Power pump backup system. Does the bifold door come with a backup system too? Kind regards, Lillian
226 I am receiving a R&M steel 60x80 hangar. If I order it without the Schweiss hydraulic one piece door and wish to install at a later time (for financial reasons) will that entail any installation problems. Can you please give me a quote for a Red Power Pump Door to fit a 60 wide 18 high opening? Please quote Red Power motor, insulation and lites in the upper panel, shipping. Thank you. Tammie
227 Replacing existing sliding doors in 60' x 100' hangar. will need Schweiss hydraulic doors in both ends. This is a city funded project and they will be requesting bids from the companies we get information from. We are in the research phase of this and would appriciate any additional info you may have regarding application of Red Power hydraulic systems and installation along with any cost estimates.
228 Need pricing on your Schweiss quality built hydraulic doors, size range and Red Power hydraulic pump technical features. We build hangers for ourselves and third party. Thanks, Jason M. SR Projects Mgr, Aviation Group
229 I am in the process of buying a new hangar in Nevada that is under construction. It will have your 58'X16' opening size Schweiss hydraulic door installed and I wanted to see what you might have available in windows for that type of door. Is there single or double pane windows as an option? What sizes do you have? Let me know what size Red Power hydraulic system it will need. At your convenience. Thanks in advance. Edward.
230 Good day, I am looking for hydraulic one piece doors for hangers. I require them between 18m and 30m in length and the hieght to be 4.5m. We need 14x doors ranging in those sizes. Could you give me an indication of Schweiss Door costs, shipped with Red Power hydraulic pumps attached to South Africa, and/or if we can manufacture them locally under license? Your response in this regard will be greatly appreciated. Braam
231 Preparing plans for a large new hanger. Looking at housing minimum of 2 Kingair aircraft (type 90 to 200).Visualizing your Schweiss hydraulic door with biggest Red Power hydraulic pump system to lift it. What else should I get with this door. Don't think I need insulation, unless you think it will help a lot to keep the Oklahoma heat out.
232 Hi I am a metal building dealer, on some of the projects I will have a need to furnish and install a hydraulic or bifold door such as you at Schweiss Doors manufacture. Currently I'm working on a project where the building will be an airplane hangar that requires a 50ft. wide by 12ft. high hydraulic door.They are interested in your Red Power hydraulic pumps and backup systems. I'm interested in becoming a reseller or dealer for your products, but would prefer to have you be the installer.
233 We will build a (minimum) steel building of approximately 40' by 80' to house two small aircraft (hanger). We would like you to provide pricing on both Schweiss Doors bi-fold and one piece hydraulic doors (with Red Power backup system). It appears we will need about a 60' door to accommodate two aircraft.
234 I have a 50' wide hangar with your BI-fold door. It still works beautifully. How much would it cost to install a Schweiss hydraulic door on a new hangar I'm almost done building? I'm talking a 40 ft. opening. Will one Red Power pump lift this OK? Thanks Giorgio
235 Please provide us with specification for a Schweiss hydraulic door for a Airport hangar clear opening 40'-0\"x 14'-0\" Also need specs on Red Power Electrical System as soon as possible. Regards Simon
236 I need a Quote on a one piece hydraulic aircraft hanger door for an opening with a clearance of 60' wide by 16' high. with remote Red Power coordinated Schweiss electronic control.
237 Need information, including pricing, on an aircraft door for an existing steel building. Will be taking out two overhead doors and will need the most efficienct and cost effective hydraulic Schweiss designed stock aircraft door installed. Don't skimp on the Red Power pump though.
238 We are bidding a project in Scottsdale, AZ and there is a Schweiss hydraulic hangar door specified with your newest Red Power backup system. Please contact me as to local distributor/installers that we can have bid this project to us. Thanks
239 Need to replace an existing "Brand Z bifold with a Schweiss hydraulic door with Red Power Safety Advantage System to accept a larger plane. Current bifold is 14 foot opening x 49. Can you send a quote on cost of door, shipping to Idaho so I can get an idea as to what I am looking at spending.
240 We are building an aircraft hanger on a small, private airport 15 miles east of Modesto, CA. The 50'x60' building will have 20' eaves and requires a Schweiss hydraulic door with dimensions 16'x44'. We are acquiring the property this week and will need to go forward with this project very soon in order to finish before fall. If a one piece is used, we are interested in the Red Power hydraulic pump. Pleas send your quote. Thank you Frank K.
241 If we can guarantee a build time of two weeks we'll order a Schweiss hydraulic hangar door now. We talked this morning on the phone about it. We are pulling a trailer to the Oshkosh airshow and could pick the door up on the way home from Oshkosh. I\"m sure you guys are attending the show or have a vendor booth there? We would need to pick up the door and Schweiss Door Red Power hydraulics on a Monday. Art A. Dubois, WY
242 We are a builder and preparing a quote for a project which has all approvals and a new plane waiting to be housed in the hanger. Please forward quote on a Schweiss hydraulic door fitted with Red Power hydraulic backup system with clear opening dimensions needed and loads of door. Your rapid follow up will be appreciated.
243 I need to get pricing, installed, for the following Schweiss hydraulic door at the Airport, Hondo, Texas: eight each 36' x 10' Red Power hangar doors one each 52' x 18' Red Power hangar door. All with backup systems and remotes. Thank you.
244 Dear Sirs We are general contractors in Malibu, California. We have single family beach home in construction. The client would like aircraft hanger doors in hydraulic one piece Schweiss design with Red Power backup system, articulated to exterior. Sizes are two ea. @ 8'-9\"X 9'-6\" and two ea. @ 13'-1\"X 9'-6\". Material spec'd as \"glass/wood frame\". Please price accordingly or contact us for more information. Thank you, Raphael P.
245 I am building an aircraft hangar and am interested in a Schweiss Hydraulic one piece door or similar door to span a 12 to 14m opening with an open height of 4m. What options can you offer in Red Power hydraulic pumps and at approximately what cost? The hangar will be at Mt Beauty in Victoria
246 I am preparing a proposal for a hangar building in the Memphis Area. The building will have (4) 60x16 hydraulic one piece Schweiss doors. The project timing is early fall. Could you give me a budget price for each door having Red Power hydraulic systems with an escalation percentage for material price increase. Also, I would like to know the vertical clearance dims. Thanks, Bill H.
247 I am sending this request for my father who does not own a computer. Do not call him! He is going to build a 40x50 hangar in Southern Michigan and is looking into the different door options. He is planning on a 40 foot door with 10 or 12 feet of verticle clearance. Can you please send him a catalog on your Red Power hydraulic pumps/doors and a few rough estimates on your different styles of doors. Thank you, John P.
248 Building a hanger. Local truss manufacture said to get the hinge location information for the prebuild of the trusses. 40' outside to outside of wall, 2\"X6\"X10'. Location is Moose Pass, Alaska, cold weather, Schweiss hydraulic door, thinking Red Power electric system motor with backup system. Could I get an approximate cost of door also.
249 I like the Red Power Hydraulic Pumps. I need a Schweiss Hydraulic Hangar Door for size of B1900 and Dash 8-100/300. Any idea's or contacts for Hangars? Best Regards, Gilbert, Nairobi
250 We are just completing our hangar and are looking for a qoute on a door , one piece hydraulic. opening of 74 feet by 21 foot 6 inches high. Diagonals are 77 feet 3/4 inches( a perfectly square opening) please provide a qoute for both outside mount and flush mount and Schweiss Red Power backup system. What would be the delivery time? and delivery costs to Penticton British columbia. A prompt response would be appreciated Thanks Jim
251 Hi I am redoing a 44 x 36 x 16 hangar. The hydraulic door works fine, but seeing your new Red Power pump on your web site, I think I may be interested in a replacement in order to get a faster lift. Wondering if this could be done and if it is in my price range. Cheers, Warren
252 I would like to install hydraulic doors for my hangar which has an opening 36' x 10' (approximately). It is a wooden hangar. I need to know what strength requirements are there to support a Schweiss door? Do they all come with your new Red Power hydraulic pumps as detailed on your web site? Also, do you have a representative in Europe, as this is where I am based. Regards, Anna M.
253 Hi, I would like a quote for a Schweiss specialty Red Power Pump driven hydraulic door for an aircraft hangar which would be 20m wide and approximately 6m high when opened. If you could quote for both a manual and remote control door and include the cost of delivery to an airfield near Doncaster in the UK that would be great. Many thanks Steve R. Sandtoft Airfield UK
254 Dear sirs, Please send me the details about aircraft clamp shell manintenance hangar, landing mats and Schweiss hydraulic door and Red Power hydraulic systems.
255 We are preparing a design for some aircraft hangers here in Napier, New Zealand. Client requirements are a 12.7m clear span with 3.3m clear opening height. Most interested in you Schweiss hydraulic lift one piece doors with Red Power hydraulic pumps but will also consider bifold strap driven doors. I've seen a couple of your doors here and the owners brag about them in our local watering hole.
256 Hello, 1) We have a 54 ft. Schweiss Bi-Fold installed in 1998, with 4 cables. We would like to get the price for upgrading our cable system to straps with auto latching, and installation. I know you need the door serial and model #. I think it is on the bottom of the frame. I also want another Schweiss door, this time a hydraulic door with Red Power hydraulic pump and backup system. This will be about a 78 ft. door. Can you swing me a price on that. Jon S. Mojave Air Racing Team.
257 We are in need of an 80' wide by 20' tall (clear opening) hydraulic door for a Hangar in Bend Oregon. Does Schweiss have a high lift option that would reduce my eave height for a door this wide? I have not installed a Schweiss door for a number of years so am looking forward to the opportunity of using your new Red Power hydraulic pump system. Could you provide pricing for the door, including freight, and lead time. Thank you, Doc
258 I would like to have more details, brochures, apprx. costing etc. for Schweiss brand Red Power Hydraulic Hanagr Doors for our proposed Hangar New Project. The Approximate size of the Hangar door is 153' Wide x 48' High x 2 Nos. Kindly let us know whether you have any representative in India. If so, please forward their address.Chandrasenan
259 I am going to build a hanger and shop on my new airstrip in the country. I have been talking to various steel frame builders and am not sure if I should go with pole type or ladder frame type construction. From a purely strength consideration for either a bi-fold or one piece hydraulic, which would be the best for your doors? I know your doors work with both types but am told that the pole building is overall stronger than ladder frame but I am not sure. I have seen your Schweiss hydraulic doors in action they are real beauties and the ones with the new Red Power pumps really open smoothly.
260 The hanger I have has one of your older Schweiss hydraulic doors on it. The door has worked fine, but being the person I am who likes to spend money and keep up with the times and ahead of the Jones's I would like to get one of your new Red Power hydraulic pump systems on it as shown on your web site. Can I also get a new seal for the bottom edge? Can the door be converted to the new Red Power by me or do I need one of your installers or an electrician to do it? Thanks for your help, Louie, up here in Sitka. God's Country.
261 I am considdering building a new hangar and would like an estimate on a new hydraulic Schweiss door (with Red Power hydraulic pump). The size is approximate because the hangar is still in consideration. The hangar would be a 75x75x16 all steel construction building.
262 Pricing for 60' x 20' hydraulic hangar door with Red Power hydraulic pump options, delivered to Fillmore, Utah. Price required on or before 5/27/12. Can e-mail drawings/specs if required.
263 Looking for the design forces for a 58' wide by 18' high Schweiss hydraulic door with Red Power hydraulic options. Project is located at Outagamie County Airport, Appleton, Wisconsin.
264 Good morning, I need a quote for (2) Red Power Motorized Hydraulic Doors with your Schweiss backup system. Opening size's are 62' x 16' and a 42' x 16'. This hangar was damaged by fire and they need these replaced asap! Thank you,
265 We are looking for 2 60'x16' Schweiss hydraulic doors for an Airplane Hangar we want to build. Insulated, Red power openers, with man doors in both. The Hangar will be @ Airport in Warren County in New York state. I may have another order for you when my buddy sees what you put up for me, he has nasty sliders on his hangar.
266 We are building a new hangar 70x70x18. Can we get a custom sized Schweiss hydraulic one piece door made for this or do we need to go with a standard size door you make. We fly an Otter on floats. Can you give recommendations and tips on what size Red Power hydraulic pump to lift a big door. We are located on the MN boundary waters.
267 Just beginning to do our research on designing a hangar type building. Would like some Schweiss Doors pricing information on insulated bi fold and hydraulic doors. Size would be 56'W by 30'H and is a size of 70'W by 30' H available. We are in the design phase, so a sales person should call to educate me on your new Red Power hydraulics. Email or snail mail is fine. thanks.
268 I would like to get more information and a quotation on a 26 ft high by 80 ft wide Schweiss hydraulic door. Price for the door only, but with Red Power hydraulic pump for best lift with shipping to Phoenix, AZ. I would also like to get your pricing options for your company to install, partial or turn key. We anticipate installing the door in a tilt-slab concrete hangar. Expected quantity is a minimum of one and up to four. Quantity discounts available would be appreciated.
269 Have a 60X60 hanger with a 20x45 wide opening just curious how much it would cost to replace my old clunker with one of your fine Schweiss hydraulic doors with the Red Power pump options? Thanks Tim, out in Grapevine, Texas
270 I am pricing 3 hangers in Arkansas for which I will need doors, they have requested Schweiss hydraulic doors with Red Power backup systems. I am not sure on the width of door required yet. Can you Give me an idea on sizes available and some base pricing. Also do you have crews that install in my area of Ontario, Canada. Thanks Dave
271 I need a quote on Schweiss hydraulic doors like the the one we purchased for Burgess Aircraft Management, except now I see you've come out with a new Red Power hydraulic system. My boss wants that. Can you tell me what my clear ht. needs to be from? Thanks, LaDonna
272 Dear Sir / Madame, We structural engineers and are currently designing / detailing a Hanger project in Dublin, Ireland. We wish to specify Schweiss bifold and hydraulic Red Power doors to suit this project and are interested in your product. The door span we are looking at is approx 35m which will be vertically supported. We also need to specify the structural steel to support the doors and therefore we need the weights and the support loction (typical will suffice for now) to suit your door spec. Thank you in advance for your assistance.
273 I have a port a port hangar with a one piece sliding center door and clam shell side doors. Does Schweiss Door stock a one piece hydraulic door that would replace just my one sliding door? If so, price and shipping charges to CA please. Door dimensions are close but approximate. Include Red Power pump and one extra remote.
274 We are looking for an economical replacement for old sliding doors on hangar. Prefer to get a Schweiss one piece hydraulic door. Will probably want to get your Red Power backup system and have it insulated. Installation in La Salle,CO
275 WE ARE BUILDING A HANGER IN SPRINDALE ARKANSAS. WE NEED A 60' X 20' INSULATED DOOR IN YOUR SCHWEISS ONE PIECE HYDRAULIC LINE. BIG DOOR, WILL NEED BIG RED POWER PUMP, WHAT IS YOUR PRICE AND HOW LONG WOULD IT TAKE FOR IT TO GET HERE? CAN WE GET THE SAME SCHWEISS CREW TO INSTALL, THEY DID A GREAT JOB AND WERE EASY TO WORK WITH. YOUR PRODUCTS ARE TOP NOTCH. LIKE THE RED POWER.
276 I would like to discuss options for a Schweiss hydraulic one piece Red Power Electric System hydraulic door for a 54 foot (outside dimension) wide block hanger I am building this summer. Specifically I need to understand the mounting requirements, finished and rough outside dimensions. I will need minimum 10 foot clearance. I am trying to determine the block height I need to accommodate the door opening requirement. I would like to maximize the width of opening, so need to know the returns on each side needed. I am looking at prices for a steel building as will that would be 60 wide. However, as of this point I am leaning to the block construction.
277 Need pricing on doors.1 20x50 AND ten 12x40.These doors are for a single hangar and 10 tee hangars we are building right now. Please build with Schweiss Red Power Safety Advantage Systems and price extra remotes for each. BOB
278 I Am working on an eight unit airplane Hanger with 50' Wide doors, and a highth of no less than 16' 6'. Could I get a Quote for planning purposes, on eight Schweiss Hydraulic Doors to Seattle,WA, (to be shipped to Juneau Alaska,) I need a quote for Optional ALUMINUM and STEEL, Red Power hydraulic pumps, with and with out windows. insulated and non-insulated. Please advise, Richard
279 I would be appreciative if you could send me some of your specifications, regarding your one piece hydraulic lift airplane hangar doors. I am currently bidding a project and would like to have the opportunity to quote your product with your new Schweiss Red Power hydraulic pump system. If you could send me your install sheets along with opening requirements it would be a great help. I would also like it if you could send me the information to set up an account with you. Thanks
280 Looking for a Schweiss hydraulic door for a hangar 42'x14', would like a price quote to include Red Power hydraulic pump and backup system whether or not it costs extra. I've heard it doesn't. .Thanks for any info also pertaining to shipment, regulations to Canada.
281 I NEED YOUR CATALOG WITH PRICE LIST TO CHOOSE SCHWEISS HYDROLIC 'RED POWERED CYLINDER' DOORS FOR AIRCRAFT HANGAR MEASURING 60 FEET X 70 FEET X 19 FEET HEIGHT FOR SNOWING QUEBEC AREA IN CANADA
282 I have a customer that is interested in an airplane hanger. He needs a Schweiss hydraulic door (insulated) that is 35-40 foot wide. Has a 3 small single engine planes. I pointed out your new Red Power hydraulic pumps to him on your web site, and that is why he decided on a hydraulic door over a bifold door. We sell steel buildings in Minnesota, Iowa, Dakotas & Wisc. Looking to setup long term relations with your company. Jason
283 We will be submitting a bid on the Crow Wing County Airport project and we are looking for a quote from your firm on the hydraulic doors. We can send the plans and specs to you electronically if you so wish. Can you tell me more about your new Schweiss Red Power hydraulic pumps and what size we will need. Contact Jack w/ questions.
284 Do you manufacture a sliding door for a light aircraft box hangar? A group of pilots in Missoula Montana are looking at hangar structure options, and plan to build 6-8 units this summer. If not, we would be interested in your one piece hydraulic Schweiss Doors with Red Power hydraulic pumps and backup systems.
285 I am pricing out three different size hangers and would like quotes for the following framed openings; 44' X 14' 44' X 12.5 42' X 14' all Schweiss hydraulic doors, white, no insulation needed, must be able to seal well via Red Power hydraulic pump. And all with Red Power electric opener, no need for extras as I am trying to keep the cost down. Please Email as soon as possible.
286 I just sent a request for quotes for 6 Schweiss hydrualic one piece hangar doors and forgot to mention they want (3) 4'x2' double insulated picture window in each door approx. 9' off ground and have a Red Power hydraulic pump backup system. Could you please quote with these windows or do we need to frame and install on site?
287 I would like to receive technical literature on the Schweiss bi-fold strap system and one-piece hydraulic doors (with Red Power hydraulic pumps) for small aircraft shelters. We are looking at door heights of 14 ft and 20 ft with widths of 40 ft and 60 ft widths respectively. Installation would be in Parsippany, N.J. Thank You Otis J.
288 I have an airplane hanger with 4 rolling doors. I would like to replace them with something automated like you Red Power hydraulic pump one piece Schweiss doors. My hanger is a 1.5 hour drive from the Dallas Fort Worth area. I would like to get a price and installation quote. Mike
289 Hi Julie, I need you to update your quote to me for a One-Piece Hydraulic Door. Here are the new dimensions: Width - 48' 1/4\" ; Height - one end - 14' - other end - 13' 11 1/2\". We would also like the Schweiss Red Power hydraulic pump automatic opener option with four remote controls for various aircraft. If the Red Power backup/manual door opening feature is an additional option, we need you to add that to your quote. Please email a copy of the quote. Thanks for your assistance. I look forward to visiting with you soon. Ron H.
290 Hello We are a group of people planning to build hangar space at the Regional Airport of Whitehorse. We are looking at several options from simple T-2019s to more sophisticate ones with a jet bay. We kindly ask you for quotes for the following hangar door options: 1) approx. 38' or 40' wide x 12' high Sschweiss hydraulic doors. Quote for 2, 4 8 or 10 doors 2) 58' or 60' wide and 20' high. Quote for 1 or 2 doors. What are the needs for door posts to install the doors? What is the total height required for installation of these doors? Can we install Red Power hydraulic electrical system. Thank you very much for your information Sincerely Ed
291 We would like some technical information so we could design the supports (and the door itself). It is a 60'x20' Schweiss hydraulic hangar door for an aviation high school. We plan to put translucent wall panels (CPI Daylighting) as a finish.Will want Red Power Advantage System.
292 Your Bi-Fold and/or Hydraulic Doors is specified on a project at the Eunice Municipal Airport Engineer: Aucoin & Associates Please call so I can get a price Thanks Gus M.
293 NEW HANGER CONSTRUCTED IN WOODRUFF, WI. THE HANGER IS POLE BARN CONSTRUCTED WITH STEEL. DIM. ARE 60X60X17'. THE DOOR SIZE WILL BE 54'X 16'. THE DOOR WILL BE HYDRAULIC WITH RED POWER UNIT. EXTRA REMOTE. TOP AND BOTTOM RUBBER, COLD WEATHER PACKAGE. CAN IT COME INSULATED? IF SO PLEASE QUOTE. I'M PUTTING PRICES TOGETHER. WILL START SOMETIME THIS LATE SPRING, EARLY SUMMER. THANKS, TODD
294 I am looking for design information on your hydraulic doors, specifically what the overall door height is in relationship to the opening clear height. I understand that it varies depending on the door height, but I was wondering if there is some \"rule of thumb\" for calculating the ratio. In particular, we are designing an aircraft hangar with a door with clear dimensions of 60' wide by 16' high. Any information you provide would be greatly appreciated. Thank you, Dan P. Project Designer
295 Have a steel hangar 80x60 wondering the cost of a door 60' wide x 15' high bi-fold or hydralic?? Dick C.
296 I currently have an older Schweiss bifold door on my hangar at the in Calif. Now I need another much larger hydraulic door for a large new hangar I am erecting. Wonder what your turn-around time is from time of order to delivery.
297 I have signed a lease with the Sussex County government for property to build a 100x100 metal hangar at the Sussex County Airport. I want to use a one peice Hydraulic door with Red Power pump system such as you advertise. The door must allow 22ft height opening and must accomodate a B-25 with 68 ft wingspan. I suspect a 80 foot wide door would work well.
298 Please quote a hydraulic doodr price for Meridian aircraft. Height 11ft- lenght 29.3 Wdth 43 ft.Will pick up on our own truck. Plans are to have it heated and insulated locally. Please delivery time. Harry V.
299 Hello, I have been contracted to build several hangers for A small public airport. Just looking at pricing the Schweiss hydraulic doors for near future decision. Can you send me brochures on your door so I can show them to our board of directors on the airport commission?
300 I AM LOOKING TO GET PRICING ON A 45' X 13' HYDRAULIC SCHWEISS DOOR WITH RED POWER HYDRAULICS, FRT INCL TO BOISE IDAHO. THIS WILL BE FOR AN AIRCRAFT HANGER
301 I need specifications e-mailed to me immediately for upward Schweiss hydraulic door 60-0\" wide X 20'-0\" high hanger door. Will one of your Red Power motors lift this door easily and fast. If not, price me another motor. Please respond Dean M. President HKG
302 I am a home builder. I have never built a hangar or a steel building. Hangar may be framed of wood or steel. Hangar will be 60x60. Approximately 45'x14' door of hydraulic style. Extra remote with greatest range available.
303 I am planning to build a couple hangers in the Fairbanks area this year. I would like the price of your 40'x12' hydraulic insulated door delivered to Fairbanks. Thanks, Ken T.
304 Will be building three 60x60 hangars and will want hydraulic one piece doors on all of them. No insulation, but extra remote for each. Will a door this size require an external or internal truss for added strength?
305 Hello, I have an older hanger at the Anoka County Airport. It is 40' wide, and I would guess the rough opening might be 12' high. Currently it has an older bifold door (Brand Z, not yours). The mechanics aren't in the greatest shape, and before putting money into it, I thought I'd see if I can get an approximate cost to have it replaced with a new door, preferably a hydraulic one piece if that's possible. I am interested in the least cost, installed solution, that would be insulated with an entry door. Could you give me an approximate range of costs? Thanks! Ron
306 I'm building a hangar will have a door opening 40 ft wide 128 inches high,would like to get a price on this size door,will be building in January awaitng your reply, colour of steel siding on door do we have a choice of colours? Or can we put our own on. This is a hydraulic door.
307 We have some information on a door quote for a hydraulic one piece Schweiss hangar door. On item C, the quote states that total height opening is 20'-0\". There will be 3\" thick insulated metal panel building siding attached to door frame. Will this encroach in upon the 20'-0\" clear opening stated on your spec sheet? Will the door being provided open up any higher than the 20'-0\" clear opening stated? The hangar serves DHC-6 Twin Otter aircraft- the tail of that plane is 19'-7\". If we loose 3\" out of the 20'-0\", the tail of the Otter is within 2\" of the overall clearance- which is a bit tight. Please email your response- and I may follow up with a call. Thanks- Michael
308 Hangar will be located at the Milaca airport (18Y). Construction has not yet started. Building is 45' wide x 48' deep with 12' sidewalls. Hydraulic Hangar door would be 44' wide, insulated and installed by Schweiss Doors. Thanks. Joel B.
309 I am working with one of my builders on a hanger going into Erie, PA. Please provide estimate, via e-mail, for the Schweiss hydraulic door indicated below as soon as possible. Top of door will be at 20'-0. Clear open height to be 20' - wedge. insulated. If you have any questions please call Doug
310 I need a rough quote for some budget numbers for a hydraulic door to go into a hangar with a 60'x18' wall, as big a door as I can get and as big a Red Power pump system you have.
311 We are bidding a job building a hanger and need the specifications A-1, A-2, A-3, and A-4 for our metal building company. The hydraulic door requested is 70' wide by 20' high.
312 I am building a 50 X 60 hanger in Huntsville On Ca. I need information on both hydraulic and bifold Schweiss doors and pricing. I need a minimum 40 feet wide by 14 feet high clear opening. The building is I.C.F. Styrofoam insulated cement filled blocks core poured.
313 Have seen your hydraulic doors installed on a large hangar in Auckland and need something similar. What information do you need from me to get the ball rolling?
314 My building is a aircraft hanger (30'X 40') Wood pole and truss type construction with steel siding and roof. Building is new construction just completed. How soon can you install a Schweiss hydraulic lift door with Red Power Electrical System to our location in Idaho.
315 We are currently designing a project for a local Civil Air Patrol. They have spoken to us about the installation of a Schweiss hydraulic lift door on the hanger of their new building. Door size is to be 44 ft. width by 14 ft. height. They would like a steel door and may possibly like to have an entrance door installed. I would like some additional information on your door and Red Power pump lift systems not only for the client but also for our office as well.
316 Do you have a dealer program. We sell and install hangers all across Ontario and have been using bi folds but would like to try the Schweiss hydraulic lift one piece doors. We are installing 2 hangers at our local airport here this spring and would like have more info on your system, as per requests from a couple of local pilots who have seen and used your doors. They also said to request info on Red Power, whatever that is. -Garrison S.
317 New hangar under constuction in Antwerp, floor must be clean, no rails possible measures appr; (25 meter w, 20 meter free height any possibility from your side ? Schweiss Doors bi-fold or Red Power hydraulic lift, curtainwise